White Fly Treatment 

Based on 10,000 gallons

(37, 855 Litres)

Day 1

1. Purge dose: 2 qt. of CV-600/700
2. Purge dose: 1 qt. of SC 1000
3. Measure Phosphate Levels
1. expect elevation due to extreme White Fly loading
4. Add 8 oz. of PR 10,000  
1. lower phosphates to below 200 ppb
5. Test chlorine
1. add 1 gallon if chlorine is 0 ppm
2. add 1/2 gallon if any chlorine is present
6. Add tabs to feeder or floater and watch your stabilizer
1. this applies mainly to residential pools
7. For salt pools, leave generator at current levels until pool begins to hold chlorine, then adjust generator as needed
8. Adjust all other chemicals to ideal range
1. do not add stabilizer expect adjustment after enzyme and phosphate treatments
9. Brush Pool
10. Discuss foliage treatment plan with customer

Day 2-4

1. Clean filter as needed
2. Retest chlorine
1. add 1 gallon if chlorine is 0 ppm
2. add 1/2 gallon if any chlorine is present
3. Make minor adjustments to chemicals to bring to balance
4. Brush pool

Week 2+

1. Begin Enzymes maintenance dose
1. High Infestation – 10 oz. per week
2. Normal Usage – 5 oz. per week
2. PR-10,000
1. 8 oz. per week until phosphates measure 200 ppb or less
3. SC-1000
1. 3 oz. per week  maintenance
4. PR-10,000  
1. 1 oz. per week maintenance